Home » Prodotti » Scratch » Micro Scratch Tester (30mN - 30N)

Micro Scratch Tester (30mN - 30N)

Micro ScratchMicro Scratch

Il Micro Scratch Tester è largamente usato per caratterizzare la mancata adesione di film sottili e di coating, con uno spessore tipico inferiore ai 5 micron. Il Micro Scratch Tester viene anche usato per l'analisi di coating organici e inorganici, soffici e duri. Gli esempi comprendono PVD sottili e multistrato, CVD, PECVD, fotoresist, vernici, lacche e molti altri tipi di film, usati come copertura di elementi ottici o microelettronica, per protezione o decorazione o per altre applicazioni. I substrati possono essere duri o soffici e comprendono le leghe metalliche, i semiconduttori, il vetro e i materiali refrattari e organici.

Caratteristiche

  • Metodo del graffio con punta di diamante
  • Ispezione ottica automatica
  • Attuatore di forza controllato a retroazione
  • Misura della profondità di graffio
  • Profilometria della superficie

Opzioni

  • opzione Swinging mode
  • Video ad alta risoluzione, Conscan, AFM
  • Grande serie di punte per l'indenter
  • Misura di durezza
  • Stadio riscaldato

csm title Links legati

csm title Related documents
Scratch Catalog
Products catalogs
Application Bulletin n°33

Applications of the ConScan Surface Profilometer
Application Bulletin n°32

Characterization of thermal spray coatings by  instrumented indentation and scratch testing Part II:  Indentation of plasma sprayed coatings
Application Bulletin n°28

Characterization of thermal spray coatings by instrumented indentation and scratch testing: Part l
Application Bulletin n°15

- Characterization of Polymers
- Quality Control of Minidisk polymer topcoat with Nano Scratch Tester and Tribometer
- Nano Scratch method developed as reference test for polymeric automobile topcoats
- Failure properties of nail varnish investigated with the Micro Scratch Teste

Application Bulletin n°13

- Influence of tip size on the critical load during scratch testing with the Micro Scratch Tester
- Failure of TiN-coated polymer measured with the Pin-on-Disk Tribometer
- Nano-Scratch Tester (NST) for measurement of dielectric thin films

Application Bulletin n°09

- MST Swinging Module for variable frequency scratch testing
- Combined NHT/SFM for investigation the mechanical properties of Cr2O3 thin films
- New Industrial Calotest allows greater fl exibility for measuring over/undersized samples
Application Bulletin n°08

- New Industrial Calotest for improved coating thickness determination
- Micro Hardness Tester (MHT) for fracture toughness determination of brittle materials
- New Tribometer option for reciprocating wear testing of plasticised tickets
- Low-load Micro Scratch Tester (MST) for characterization of thin polymer films
Application Bulletin n°06

- Micro Scratch Tester (MST) for assessing the scratch resistance of SiO2 passivation layers
- High-Vacuum Tribometer for MoS2 alloy characterization
- Combined NHT/SFM for characterization of Silicon materials
Application Bulletin n°02

- Vickers indentation using CSM's Micro Scratch Tester (MST)
- Abrasion testing of hard coatings with the Calowear Tester
- Quality control of IC bonding pads with the Nano Hardness Tester (NHT)
- Hard coating characterization with the Revetest (RVT) scratch tester
Application Bulletin n°01

- New Nano-Hardness Tester (NHT) for characterization of MoS2 thin films
- Automobile bumper paint adhesion analyzed using Micro Scratch Tester (MST)
- Using CSM's Revetest (RVT) scratch-tester for Rockwell indentation
- Hard coating characterization with the Revetest (RVT) scratch tester
»
Home