Home » 产品系列 » 精准划痕测试 » 微米级划痕测试仪 (MST)

微米级划痕测试仪 (MST)

微米级划痕测试仪微米级划痕测试仪

微米级划痕测试仪被广泛应用于界定薄膜与基体的结合强度，薄膜厚度一般小于５微米。它还被用于分析有机、无机，软质和硬质薄膜的破坏形式。薄膜材料包括PVD、CVD、PECVD单层或多层薄膜，感光薄膜，彩绘釉漆，和其他应用于各种领域的薄膜，包括光学、微电子、保护性薄膜、装饰性涂层等领域。基体材料可以为硬质或软质材料，包括金属、合金、半导体、玻璃、矿物、以及有机材料等。

特点

  • 金刚石划痕针头
  • 自动控制的光学显微镜观察
  • 闭环力学反馈系统
  • 划痕深度控制
  • 材料表面轮廓测量

选件

  • 摆动划痕模式
  • 高分辨率CCD光学显微镜，共焦显微镜，原子力显微镜
  • 多种划痕针头
  • 压入测试模块选件
  • 温度控制

csm title 相关链接

csm title Related documents
Scratch Catalog
Products catalogs
Application Bulletin n°32

Characterization of thermal spray coatings by instrumented indentation and scratch testing
Application Bulletin n°28

Characterization of thermal spray coatings by instrumented indentation and scratch testing: Part l
Application Bulletin n°15

- Characterization of Polymers
- Quality Control of Minidisk polymer topcoat with Nano Scratch Tester and Tribometer
- Nano Scratch method developed as reference test for polymeric automobile topcoats
- Failure properties of nail varnish investigated with the Micro Scratch Teste

Application Bulletin n°13

- Influence of tip size on the critical load during scratch testing with the Micro Scratch Tester
- Failure of TiN-coated polymer measured with the Pin-on-Disk Tribometer
- Nano-Scratch Tester (NST) for measurement of dielectric thin films

Application Bulletin n°09

- MST Swinging Module for variable frequency scratch testing
- Combined NHT/SFM for investigation the mechanical properties of Cr2O3 thin films
- New Industrial Calotest allows greater fl exibility for measuring over/undersized samples
Application Bulletin n°08

- New Industrial Calotest for improved coating thickness determination
- Micro Hardness Tester (MHT) for fracture toughness determination of brittle materials
- New Tribometer option for reciprocating wear testing of plasticised tickets
- Low-load Micro Scratch Tester (MST) for characterization of thin polymer films
Application Bulletin n°06

- Micro Scratch Tester (MST) for assessing the scratch resistance of SiO2 passivation layers
- High-Vacuum Tribometer for MoS2 alloy characterization
- Combined NHT/SFM for characterization of Silicon materials
Application Bulletin n°02

- Vickers indentation using CSM's Micro Scratch Tester (MST)
- Abrasion testing of hard coatings with the Calowear Tester
- Quality control of IC bonding pads with the Nano Hardness Tester (NHT)
- Hard coating characterization with the Revetest (RVT) scratch tester
Application Bulletin n°01

- New Nano-Hardness Tester (NHT) for characterization of MoS2 thin films
- Automobile bumper paint adhesion analyzed using Micro Scratch Tester (MST)
- Using CSM's Revetest (RVT) scratch-tester for Rockwell indentation
- Hard coating characterization with the Revetest (RVT) scratch tester
»
Home